Progressive Turf Equipment TD65, Operators Manual And Parts Lists

Page: 4 / 70

TD65
Operator’s Manual
2
INTRODUCTION
Thank you for purchasing a TD65 series mower. This product is designed and manufactured to allow
safe and productive mowing of contoured areas. A well-maintained machine will provide years of
reliable service.
FOREWORD
This is the Operator’s Manual for the TD65 and TD65-2 mower. Keep it with the mower at all times.
This manual is intended as a guide to the safe use and maintenance of the machine, so before you
operate this machine, study this manual carefully.
Replace this manual immediately if it becomes lost.
This manual is not considered all-inclusive, so for further information on specific components, e.g. PTO
shafts etc refer to the respective documents included with the manual set for this machine.
The TD65 series are contour turf grass finishing mowers with a 12 (TD65-2) or 15.5 (TD65) foot cutting
width, and are designed to be pulled by a 25-50 PTO horsepower utility tractor. High blade tip speed
give these versatile mowers the ability to mow both contoured and flat terrain that requires a high
quality after-cut appearance
Features:

Three independent, fully floating decks

Low power input per cutting width

Cut height can be set on each deck between 1 inch and 5 inches

Combination of swivelling and rigid castor wheels ensures true straight line tracking and
easy turning without scuffing

Automatic mechanical deck locks for transport
Applications:

Golf course roughs

Turf grass farms

Corporate and industrial campuses

Park lands and recreational areas

Sports venues

Landscaped venues