Progressive Turf Equipment TD65, Operators Manual And Parts Lists

Page: 30 / 70

TD65
Operator’s Manual
28
MAINTENANCE
Ensure the tractor controls are in the park position, the engine is
turned off, the parking brake is engaged and hydraulic pressure
has been relieved before performing service or maintenance.
Always use personal protection devices such as protective
glasses and face shields, protective shoes, gloves, hard hats, and
ear protection when performing service or maintenance
functions.
When completing a maintenance or service function, make sure
all safety shields are installed before placing mower in service.
LUBRICATION
A properly maintained lubrication schedule will provide a smooth
running machine for many years. Some pivot locations have grease
fittings. The following information shows and describes where
lubrication points are located and what types of lubricant are required.
Maintenance Intervals
Service
Initial Run -
50h
Daily As Req'd
100h /
Monthly
600h /
Yearly
G
rea
s
e
Intermediate Hanger Bearing - X - - -
Wing PTO Shaft (3 locn’s each)
- X - - -
Deck Pivots - - X - -
Deck Wheels - - X - -
Transport Wheels - - X - -
Wing Pivots - - X - -
Input PTO Shaft (7 locn's) - - - X -
Intermediate PTO Shaft (2 locn's) - - - X -
O
il
Inspect Gearbox - X - - -
Check Gearbox Oil - - - X -
Change Gearbox Oil X - - - X
The TD-65 blade spindles are factory equipped with maintenance free
sealed bearings as original equipment. The blade spindles do not
require manual greasing.
Never direct high pressure water spray at the blade spindles (top or
bottom). Water may enter the bearings and lead to premature failure.