Progressive Turf Equipment TD65, Operators Manual And Parts Lists

Page: 33 / 70

TD65
Operator’s Manual
31
INPUT SHAFT
– 100h / Monthly (9 Locations)
Failure to properly lubricate the telescoping shaft sections will
lead to binding of the shaft and damage to the mower or
tractor driveline.
INTERMEDIATE SHAFT
– 100h / Monthly (3 Locations)
When performing daily greasing routine, ensure all grass
clippings are removed from the mower decks. Clipping build-
up can cause overheating of the bearings and belts leading to
premature wear and subsequent failure.
DECK WHEELS & PIVOTS: As Required
The deck wheels have greaseable tapered roller bearings, and all
pivot points on the deck floatation have grease fittings. They should
be greased frequently as required.
TRANSPORT HUBS & OTHER LOCATIONS: As Required
All pivot locations have grease fittings. These include the wing
hinge pivots, the transport wheel hubs, the rotating hitch and the
hitch clevis. Lubricate these areas as required.
CROSS & BEARINGS
SLIP YOKE SPLINES
CROSS & BEARINGS
C.V. CENTER HOUSING C.V. BALL & SOCKET
TELESCOPING SHAFT*
GUARD BUSHINGS
CROSS & BEARINGS
INPUT SPLINE
NOTE* Shaft must be disconnected from tractor & collapsed for greasing telescoping section.
Inner & outer guards must be rotated to align holes for accessing grease fitting.