Progress Lighting P2514 Installation Manual Download Page 2

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

11221

785247139187

PROGRESS LIGHTING 

PROGRESS  LIGHTING  FAN  MOTORS ARE WARRANTED TO THE END  USER TO BE 
FREE  OF  ELECTRICAL  AND/OR  MECHANICAL  DEFECTS  FOR  A  PERIOD  OF  30 
(THIRTY)  YEARS  FROM  DATE  OF  SALE.  PULL  CHAIN  SWITCHES,  REVERSE 
SWITCHES, CAPACITORS AND METAL FINISHES ARE WARRANTED FOR A PERIOD 
OF  1  YEAR.  WARPING  OF  WOODEN  OR  PLASTIC  BLADES  IS  NOT  COVERED  BY 
THIS WARRANTY.

THE  END  USER  HAS  THE  OPTION  OF  RETURNING  THE  DEFECTIVE  FAN  TO  THE 
PLACE OF PURCHASE DURING THE FIRST 30 DAYS FOR A REPLACEMENT. AFTER 
30  DAYS,  THE  PURCHASER  MUST  CONTACT  PROGRESS  LIGHTING  FOR  REPAIR 
OR REPLACEMENT. THE END USER ALSO BEARS THE RESPONSIBILITY FOR ALL 
COSTS  IN  THE  REMOVAL,  SHIPPING AND  REINSTALLATION  OF  FANS  OR  PARTS 
FOR REPAIR OR REPLACEMENT.

PROGRESS  LIGHTING  WILL  NOT  ASSUME  LIABILITY  OR  RESPONSIBILITY  FOR 
DAMAGES  (INCLUDING  INCIDENTAL  OR  CONSEQUENTIAL)  CAUSED  BY  THE 
IMPROPER  INSTALLATION  OR  OPERATION  OF  THE  UNIT  OR  ITS  COMPONENT 
PARTS,  OR  BY  THE  FAILURE  OF  SUPPORTING  HARDWARE  NOT  SUPPLIED  BY 
PROGRESS  LIGHTING.  THIS  WARRANTY  IS  GIVEN  IN  LIEU  OF  ALL  OTHER 
GUARANTEES, WHETHER EXPRESSED OR IMPLIED, AND IS VOIDED IN CASES OF 
ABUSE,  MISUSE  OR  IMPROPER  HANDLING,  NEGLIGENCE,  SHIPPING  DAMAGE, 
UNAUTHORIZED REPAIRS (MADE OR ATTEMPTED) OR UNUSUAL APPLICATION.

SOME  STATES  DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED 
WARRANTY  LASTS  OR  THE  EXCLUSION  OR  LIMITATIONS  OF  INCIDENTAL  OR 
CONSEQUENTIAL  DAMAGES,  SO  THE  ABOVE  LIMITATIONS  AND  EXCLUSIONS 
MAY  NOT  APPLY  TO  YOU.  THIS  WARRANTY  GIVES  YOU  SPECIFIC  RIGHTS  AND 
YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

30-YEAR LIMITED WARRANTY

30-YEAR LIMITED WARRANTY

Summary of Contents for P2514
































Reviews: