Operating Your Transmitter 10.
Restore power to ceiling fan and test for
proper operation.
1.
" , , "
buttons:
These three buttons are used to set the fan
speed as follows:
= Low speed
= Medium speed
= High speed
2.
" "
button:
This button turns the fan off.
3. The
" "
button turns the light ON or OFF
and also controls the brightness setting.
Press and release the button to turn the light
ON or OFF. Press and hold the button to set
the desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
4. The " " button (inside the battery
compartment in the back side of the
transmitter)-Fan reversing function,
used to set the fan forward or reverse,
press the button forward (for warm
weather) or reverse (for cool weather):
To operate the reverse function on
this fan, press the reverse button while the
fan is running.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, etc.
NOTE
:
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 19. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 20. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
Figure 19
Figure 20
Figure 18