Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 14)
Mounting plate
Mounting ring
Screws
Figure 14
Installing the Light Kit 8.
B.- Lamp gets hot quickly contact only
switch/plug when turning on.
C.- Do not touch hot lens, guard, or
enclosure.
D.- Do not remain in light if skin feels warm.
E.- Do not look directly at lighted lamp.
F.- Keep lamp away from materials that what
burn.
G.- Use only with wattage or lamp marked
on fixture.
H.- Do not touch the lamp at any time. oil
from skin may damage lamp. use a soft dry
cloth. (halogen lamp may be cleaned with
rubbing alcohol.) halogen lamps operate at
extremely high temperatures and pressures.
they will shatter if not handled correctly.
I.- Do not operate the luminaire fitting with
a missing or damaged shield.
J.- Do not place near water.
K.- Not for outdoor use.
Step 5.
Raise glass shade up against the
mounting plate and secure it to fan by
twisting glass clockwise until snug. DO
NOT OVERTIGHTEN.
(Fig. 16)
REMEMBER:
To disconnect the power. The
fan blades must be already attached to the
fan.
Step 1.
Remove the 3 screws from the
mounting plate and keep it for future use.
Step 2.
Raise and hold the light plate close to
the mounting ring and proceed to do the wire
c o n n e c t i o n s . C o n n e c t t h e w h i t e w i r e
connectors from the light plate and fan,
follow the same procedure with the black
wire connectors. (Fig. 15)
S t e p 3 .
Tu c k c o n n e c t i o n s n e a t l y i n t o
mounting plate. Secure by tightening the 3
screws previously removed.(Fig. 15).
S t e p 4 .
I n s t a l l 1 0 0 W h a l o g e n b u l b
(included).
(Fig. 16)
Instructions pertaining to a risk of fire, or
i n j u r y t o p e r s o n s i m p o r t a n t s a f e t y
instructions lighted lamp is
hot!
Warning-
to reduce risk of fire or injury to
persons
A.- Turn off/unplug and allow to cool before
replacing lamp.