If the electrical power supply to the system fails, a handle supplied with the system is to operate the
system manually: it should be inserted into the socket located at the rear side of the gear motor. Please
unscrew the cap (38) before inserting the handle into the socket.
REMINDER !
• Disconnect the electrical power supply of the system before inserting the handle into the socket.
• Remove the handle from the socket and replace the cap as soon as the handle is not in use.
HOISTING THE SAIL
Please refer to standard drum Installation Manual page 24
ADJUSTMENT OF THE HALYARD SWIVEL
Please refer to standard drum Installation Manual page 25
FITTING AND ADJUSTING THE WRAPSTOP
Please refer to standard drum Installation Manual page 17
12
FINISHING THE INSTALLATION
USING THE SYSTEM MANUALLY
WHEN USING THE SYSTEM FOR THE FIRST TIME, PLEASE FURL AND UNFURL THE SAIL MANUALLY ONE
TIME WITH THE HANDLE SUPPLIED TO CHECK THAT ALL ADJUSTMENTS (sail’s luff length, position of
halyard swivel, Wrapstop) ARE CORRECT.
USING THE SYSTEM FOR THE FIRST TIME
Summary of Contents for NDE 42
Page 1: ......
