T CHAFE ON THE ELECTRICAL WIRES OR HYDRAULIC HOSES ABOVE DECK.
e deck is strongly recommended in any case.
TION!
watertight tested in factory.
open the gear motor, the unit may be permanently damaged.
written consent of PROFURL will void the warranty.
• OIL
- As per ISO 6073 HL
- Viscosity 10 to 30 cst
• MAXIMUM OPERATION TEMPERATURES
- minus 10°C to + 75°C with standard oil
- minus 35°C to + 75°C with special oil
• HYDRAULIC PLUMBING CONNECTION
- Requires two feeding hoses finished by female
7/16” JIC
terminal
- No drain
The connection onto the hydraulic gear motor should be achieved by flexible hoses above deck, being
connected on through-deck fittings, and rigid tubing inside the boat.
• HYDRAULIC POWER PACKS
The PROFURL NDH 42 and NDH 52 are designed to be connected to the most common power packs. The
output to feed the system should be adjusted to match the values as shown in the above headboard :
- 100 bars / 1470 Psi for models NDH 42
- 140 bars / 2058 Psi for models NDH 52
Should the power pack produce higher values than above, please use a limiter on the output feeding the
system.
CONNECTING A HYDRAULIC SYSTEM
(NDH series)
11
Models
NDH 42
NDH 52
Max operating pressure
100 Bars/1470 Psi
140 Bars/2 058 Psi
Max rotation speed
30 Rpm
30 Rpm
Flow at max speed
15 L/mn
3.96 US Gal/min
15 L/mn
3.96 US Gal/min
HYDRAULIC
GEAR MOTOR
DISTRIBUTOR
WITH OPEN
CENTER
Summary of Contents for NDE 42
Page 1: ......
