ProFurl MK0, Installation Manual

Page: 9 / 35

MK 0
9
III 4 g - Completely insert the lower end of the feeder profile (1) into the striped aluminium
connector of the gooseneck articulation (10) . Please see drawing 4.
III 4 h – Check fitting order of washers and nuts (3, 20 ,30, 30a, 31) onto the vertical stainless steel pin.
Please see drawing 4. Permanently fit the Nylock nut (31) with a 17 mm tube wrench onto the thread of the
stainless steel vertical pin. Fit the plastic cap (32) over the locknut.
III 4 i – Go to mast head taking with you :
•
the 2 end brackets (5a)
•
all the articulation brackets (5)
•
the sheave box (11)
•
all the slide screws (7) to be slipped up in the mast track, washers (33)
and locknuts (8).
Drawing 4