NOTICE D’INSTRUCTIONS GENERALE POUR
COFFRETS ET ARMOIRES ELECTRIQUES
V3.0
Page 32 / 51
17)
RECEIPT OF MATERIAL
-
At the reception of the equipment, please ensure that it is not damaged, and that it is complete
with no part lost during transport.
-
Please check too the same points for the control panel
-
If issues are found, if the control panel is damaged or not complete, reserves must be declared on
transport documents and confirmed within 48 hours to the transporter, copy to Profroid.
-
If the delivery does not correspond to your order, please contact Profroid.
-
Remote control panels (not connected to an equipment), are generally delivered fixed with screws
on their palett. Those screws are located at the bottom, inside the foot of the enclosure Be
careful not to damage the control panel and the components located inside at the bottom when
removing those screws. Be careful too at the stability of the control panel which will no longer be
fixed on its palett.
-
When the control panel is delivered on a metallic base frame, this one is made of several parts.
The installer will be able to create a way for its cables arrival, by removing one of those parts (if
the cables come at the bottom).
-
If some of the cables need to come in the control panel through the top, the installer will have to
install cable glands for each cable, according to environmental conditions of the installation.
