8
STEP 4
Install the saddle (7) to the Horizontal seal post
(31) with Multifunctional wrench.
Then tighten the Horizontal seal post (31) on the
Saddle supporting tube (6) with Flat washer(19),Nut
(20). Last, insert the Saddle supporting tube (6) to
the Main frame (1) and tightly with Knob bolt (28) .
Note:
1.
You can control the Knob bolt (28) to adjust
the appropriate height which is suitable for you .
2.
Before use the bike, please make sure that
the Saddle(7) have locking on the Horizontal seal
post (31).
STEP 5
Attach the Pedals (10L/R) to the Cranks (35L/R) of
the Main Frame (1).
Note: The left pedal (10L) should be tighten in the
counterclockwise direction, the right pedal (10R)
should be tighten in the clockwise direction.
STEP 6
Connect the Sensor connective wire (21) and
Pulse wire (27) with the Computer wires corre-
spondingly. Then fix the Computer (9) on the com-
puter bracket with the Flat washer (33) and Screw
(34) .
Now, your machine is ready for use.
V
