ProFlow PF-BTA, Technical Manual

Page: 13 / 32

ELECTRONIC CONTROL PANEL
Page 13
DIAGNOSTICS MODE

In the Diagnostics mode several operating parameters
can be consulted; particularly during a service intervention,
these parameters can be helpful to identify the cause of a
problem or malfunction.

Before entering the Diagnostics mode, make sure that
the appliance is in service mode.

In case no button is pressed in a period of 5 min, the
control panel will automatically return to the service mode!
Accessing the Diagnostics mode
1.
Press the scroll button and hold it for 6 sec until the
display shows:
2.
Within 10 sec, press the down button; the display will
show:

You are now in the Diagnostics mode.

Press the scroll button to advance to the next
diagnostics parameter.
Available diagnostics parameters
 Regen X days ago: number of days since last
regeneration.

In Srvc: total number of days in service.

# of Regens: number of regenerations since installation.
 TotVol: total volume of treated water since installation.

LastRgn@: consumed capacity at last regeneration.

InstFlow: instantaneous flow rate through appliance.
 AvgVol: calculated average daily water usage.

Capacity: calculated capacity between regenerations.
 Hardness: setting of water hardness.

Rsrv: setting of reserve capacity.

Regen @: setting of time of regeneration.
 Override: setting of number of days between
regenerations.

Cycle X: setting of length of corresponding regeneration
cycle.

Units: control is programmed for Metric units.

MTR: setting of the water meter.

Capacity: control is programmed for hardness setting.

Regen: setting of the regeneration mode.
 Valve Type: setting of valve type.

MP Resets: number of resets of the microprocessor.

Memory Reset: number of corrupt memory start-ups.

EZRSDg: software version.

CapToUse: remaining capacity.
Exiting the Diagnostics mode
1.
Press the scroll button repeatedly until the display
shows:

Press the up or down button to exit the
Diagnostics mode.
Regen XXdays ago
System Check
Exit