ProFlow PF-BTA, Technical Manual

Page: 12 / 32

ELECTRONIC CONTROL PANEL
Page 12
6. Press the scroll button again; the display will show:

Press the up or down button to set the volume
of filter media.
7. Press the scroll button again; the display will show:

Press the up or down button to set the number
of days between regenerations.
8.
Press the scroll button again; the display will show:
 Press the up or down button to set the length
of the regeneration cycle.

Press the scroll button again to advance to the next
regeneration cycle.
Cycle 1 Backwash
Cycle 2 Brine draw/slow rinse
Cycle 3 Fast rinse/brine tank refill
9.
Press the scroll button again; the display will show:

Press the up or down button to set the
regeneration mode:

Dlyd/Immd: when the remaining capacity equals
the reserve capacity, a delayed regeneration at
the programmed time of regeneration is started;
however when the remaining capacity equals 0
before the programmed time of regeneration is
reached, an immediate regeneration is started.
 Immediate: when the remaining capacity equals
0, an immediate regeneration is started.
Note: Delayed manual regeneration is not
available when this regeneration mode is
selected.

Delayed: when the remaining capacity equals the
reserve capacity, a delayed regeneration at the
programmed time of regeneration is started.
10.
Press the scroll button again; the display will show
(only when the regeneration mode is set to ‘Delayed’ or
‘Dlyd/Immd’):
 Press the up or down button to set the time of
regeneration.
11. Press the scroll button again; the display will show
(only when the regeneration mode is set to ‘Dlyd’ or
‘Dlyd/Immd’):

Press the up or down button to set the reserve
capacity:
 Variable: the reserve capacity is calculated
automatically, based on the registered daily water
usage.

Fxd: press the scroll button again and press the
up
or down button to set the reserve
capacity to a fixed amount.
12.
Press the scroll button again; the display will show:

Press the up or down button to set the function
of auxilliary contact 2:

Regen: aux. contact is powered during entire
regeneration.

Chlor.Cell: aux. contact is powered at start of
brine draw/slow rinse cycle. Press the scroll
button again and press the up or down
button to set the duration of activation of the
chlorination cell.

Maintenance: aux. contact is powered when
Maintenance Reminder is triggered.

Error: aux. contact is powered when timer failure
occurs.
13.
Press the scroll button again; the display will show:
 Press the up or down button to save the
program into the NOVRAM® and exit the
programming level.
Cycle 1: XX min
Regen @ 2:00
Exit
Resin:XXX liters
Override: 4 days
Regen:Dlyd/Immd
Rsrv Variable
AUX2: Regen