8
ProSear
Installation Instructions
Checking For Leaks
After installing the grill or after any service or repair you must check all gas connec-
tions for leaks.
Spray or brush a solution of 50% water and 50% liquid soap on to all gas connections
and the valve. See Figure E. Make sure the gas is turned on and wait up to five minutes.
If bubbles appear, there is a leak. See Figure E1
To repair the leak, tighten the connection. If the leak persists, shut off the gas and get a
qualified service technician to repair the leak.
WARNING:
Never use a flame to check for leaks. Doing so may cause serious injury,
property damage or death.
Liquefied Petroleum (LP) and Natural Gas have an odorant added to the gas. If
you smell an odor, you may have a gas leak. Follow the leak check instructions
above. If you are unable to find and repair the leak, shut the gas off and call a
qualified service technician or your gas company.
WARNING:
When checking for or repairing leaks or if you smell gas,
extinguish all flames and do not turn on any device that could cause a spark such as
lights, power tools, cooking appliances or this grill. If you cannot
repair the leak, turn the gas off and call a qualified service technician to repair the
leak.
Figure E
Figure E1
