Cutting, scarifying and mulching
60
Profihopper PH4WDi BAF0012.0 02.13
8.6
Starting the rotor
•
Start the engine.
•
Release the parking brake.
•
Switch the mower unit on.
Select a medium engine speed to start
the mower unit gently.
•
Use the accelerator lever to increase the engine speed (the maxi-
mum rpm is recommended for mowing).
•
Press down slowly on the accelerator pedal until you reach the de-
sired speed.
Match your driving speed to the mowing condi-
tions.
8.7
Emptying the hopper
A fill level signal sounds when the hopper is full.
Empty the hopper when you hear this signal.
Do not overfill the hopper; you could damage the conveyor system.
When emptying, do not exceed the slope incline of 5°
≙
8.75%!
Emptying at ground level
•
Pull the lever back to tip the hopper.
•
Return the hopper to the working position when it is empty by pushing
the lever forward.
Emptying from a height
•
Back the machine to within about 1 m of the discharge point.
•
Use the control lever to bring the hopper to the correct discharge
height.
•
Slowly back towards the discharge point (Fig. 8.7)
Summary of Contents for 4WDi
Page 23: ...General safety instructions Profihopper PH4WDi BAF0012 0 02 13 23...
Page 40: ...Instrument panel and controls 40 Profihopper PH4WDi BAF0012 0 02 13...
Page 78: ...Maintenance 78 Profihopper PH4WDi BAF0012 0 02 13 Height adjustment Fig 10 6 2 13...
Page 82: ...Maintenance 82 Profihopper PH4WDi BAF0012 0 02 13 10 10 Maintenance plan...