PROFIHOPPER 4WDi, Operating And Maintenance Manual, Page: 50 / 88

Cutting, scarifying and mulching
50 Profihopper PH4WDi BAF0012.0 02.13
The cutting and scarifying blades can be swapped without using tools
(see Fig. 8.1).
MOWING
There are 4 configurations for the mowing and scarifying blades. The
Profihopper is fitted with 36 pairs of wing blades as standard.
Series
•
to
••••
(see diagram A).
Illustration A
CAUTION
Only fit the long wing blades to the clip bolts that are mounted from
left to right on the rotor (in the direction of travel) (see illustration
above)
9 pairs blades x 4 rows = 36 pairs blades/rotor
The other clip bolts should only be fitted with scarifying blades (if
scarifying over a narrow width, see page 17).
The marking on the rotor makes it very easy to fit the blades.
No tools are needed to hang the blades on the clip bolts.
The Profihopper can mow any kind of lawn with this equipment, even in
damp conditions.
If required, the wing blades can be replaced by "Y"-shaped blades (72x).
These require less power from the machine but are restricted in their
collection capabilities.
The rotor speed may have to be changed, depending on the grass type
and density.
•
••
•••
••••
â
Direction of travel