Instrument panel and controls
Profihopper PH4WDi BAF0012.0 02.13
39
6.3
Control levers
1.
Accelerator lever
To start and stop the engine, move the lever to the idle position.
2.
Emptying the hopper
To empty the hopper, pull the lever back; to move it to the working po-
sition, push it forwards.
3.
Raising/lowering the hopper
To raise the hopper, pull the lever back; to lower the hopper, push the
lever forward.
4.
Raising/lowering the mower unit
To raise the mower unit, pull the lever back; to lower it, push the lever
forwards. The lever must be locked in the forward position during op-
eration (cutting, etc.) In this way, the mower unit remains in a floating
position and can follow ground undulations.
5.
Switching the mower unit on
Select a medium engine speed to start the mower unit gently. Press
and hold the switch until the mower unit is running evenly. This switch
is deactivated when the hopper is raised.
6.
Switching the mower unit off
CAUTION
Drive very carefully if the hopper is raised. The machine could over-
turn.
7.
Hood opening handle
The hood is locked mechanically and is only opened with the aid of
the ignition key.
For this purpose, place the head of the key on the slotted screwdriver
and turn to the right less than 45°. The mechanical lock is therefore
open and the seat support can be opened upwards using the handle
(Fig. 6.3-2).
Summary of Contents for 4WDi
Page 23: ...General safety instructions Profihopper PH4WDi BAF0012 0 02 13 23...
Page 40: ...Instrument panel and controls 40 Profihopper PH4WDi BAF0012 0 02 13...
Page 78: ...Maintenance 78 Profihopper PH4WDi BAF0012 0 02 13 Height adjustment Fig 10 6 2 13...
Page 82: ...Maintenance 82 Profihopper PH4WDi BAF0012 0 02 13 10 10 Maintenance plan...