PROFIHOPPER 4WDi, Operating And Maintenance Manual, Page: 53 / 88

Cutting, scarifying and mulching
Profihopper PH4WDi BAF0012.0 02.13 53
8.2 Adjusting the baffle plate
There is a baffle plate in front of the mowing unit (Fig. 8.2-1) which can be
adjusted to improve cut quality when mowing. The baffle plate is set for
scarifying at the factory.
Setting options:
•
Scarifying push the plate forwards to the stop.
•
Mowing push the plate back to the stop.
The plate must be in the forward position when scarifying.
Four bolts (Fig. 8.2-2) need to be undone to slide the bar.
You can use a hammer to tap the plate towards the rotor (Fig. 8.2-3).
front
rear