Manual: Orcabot XXL
Pro 2
version 1.0.1 Mar 2017
10
www.prodim-systems.com
5.2.
Preparing the printer
A few things are important while installing the Orcabot 3D-printer XXL
pro 2
:
-
The Orcabot XXL
pro 2
must be placed on a smooth and level surface (solid table).
-
There must be an electric socket available.
-
The printer melts filament during printing, this can cause damps and odours. Make sure to
choose a room or place which has decent ventilation, little draft and temperature change.
Installing the Printer:
-
Take the printer out of the original box and place on a solid table.
(be sure to preserve the original box with original foam inlay)
-
Install the float glass plate (use the 4 clamps)
-
Install the filament- and tube holders keeping the filament tube to the right side of the
printer.
Glass plate with clamps
Tube holder (s)
Filament holder(s)
- Connect the supplied power cord to the right side of the printer.
Here you can also find the on/off switch with which you can turn
the printer on or off.
Power cord and on/off switch.
The USB-port is located to the left side of the printer. Running the
printer can be done stand-alone or via a PC-connection. We
advise to use the printer as stand-alone.
