3-38
Initial Setup of the ProCurve NAC 800
System Settings
Figure 3-20. Home > System Configuration > Enforcement Clusters & Servers >
Selected ES
> Configuration
2.
Chose your region from the
Region
drop-down menu.
This choice narrows the selection for the next setting: your time zone.
3.
Select the correct time zone from the
Time zone
drop-down menu.
Time zones are listed by offset from Greenwich Mean Time (GMT)—for
example, GMT –6:00—as well as by name and by select cities in that time
zone. (If your city is not listed, you can either rely on the GMT offset or
look for a city that you know is in your time zone.)
It is important to select the correct time zone so that the NAC 800
appropriately adjusts the time that it receives from the MS.
Configure ES SNMP Settings.
If your organization has an SNMP solution
for centralized network management, you should configure your NAC 800 ESs
to integrate with the solution.
Summary of Contents for 800
