ProCurve 800, Configuration Manual

Page: 295 / 406

5-31
Configuring the RADIUS Server—Without Identity Driven Manager
Configure the NAC 800 as a RADIUS Server
Figure 5-12. Home > System Configuration > Quarantining > Test Settings Button
You might see, instead, the window shown in Figure 5-13.
Figure 5-13. Home > System Configuration > Quarantining > Test Settings Button
This window is displayed when you have edited previously configured
authentication settings. To test the new settings, the NAC 800 must
temporarily write them over the old settings, which—if the NAC 800 is the
RADIUS server for a live network—can briefly interrupt service.
Click the
no
button to cancel the test (in which case you should also wait
before applying your new settings).
Click the
yes
button to proceed with the test.
Note that proceeding with the test only temporarily overwrites the old
settings. You must still click the
ok
button on the
Home > System configu-
ration > Quarantining
window to save the new settings.
7. When the test completes, you are returned to the Home > System configu-
ration > Quarantining
window. The message at the top of the window
indicates the result. Refer to Table 5-2 for help interpreting the message.