2-30
Management Options for the ProCurve NAC 800
Menu Interface and Panel LCD
Reboot the NAC 800 Using the Panel LCD Menu
When you reboot the NAC 800, the device shuts down and immediately
restarts, booting from its primary software and startup-config.
Generally, you must reboot the NAC 800 when you update its software.
N o t e
You do not need to worry about saving your configurations because the
NAC 800 OS automatically saves configurations to its startup-config as they
are made. However, you should periodically backup your system as explained
in Chapter 7: “Redundancy and Backup for RADIUS Services.”
Follow these steps to reboot the NAC 800:
1.
Access the main LCD menu.
Press the accept button to access the main menu initially; press the cancel
button to move back a window.
Figure 2-41. Panel LCD Menu
2.
Select
Reboot/Shutdown
.
Figure 2-42. Panel LCD Menu > Reboot/Shutdown
3.
Select
Reboot the NAC 800
.
Summary of Contents for 800
