»
installation instructions
/ octo + Pro
50
>>
ASSEMBLY OF THE FILTRATION GROUP
Before you continue to fill the pool, assemble the filter group. refer to the sand filter installation instructions and the
pump operating instructions. Study these diagrams and the tables, they list the main components of the filtration system
and the composition of the various packs.
CAUTION ! ! ! The pump power supply absolutely must be protected by a 30 mA differential circuit breaker mounted
upstream from the installation.
Similarly, follow all the installation instructions set out in the manuals enclosed with the underwater light and the
control panel.
The filtration system, like every other electrical device, must be wired in in accordance with the standards in effect in
the country of installation (C15-100 in France).
Do not hesitate to call on the services of a professional to guarantee the compliance of your installation.
We strongly recommend that you install the filter below the water level of the pool. If the filter is installed above the
water line, there is a risk of deformation due to depressurisation. At most, the filter may be installed level with the
coping. In the event that the filter is installed above the water line, a check vent must be mounted on the return line and
an inspection check valve must be mounted on the suction line (these items are available from any pool specialist).
