background image

 

 
 
 

 
 

 

6. of 43   

Procontrol Electronics Ltd. 

www.procontrol.hu

 

Procontrol Proxer7 

Security guide 

Please read this guide carefully before installing 
and using the device. Please use the device 
properly and as described in the following 
manual. 

The guarantee is insured only if the device is used 
with the implements approved or specified by the 
manufacturer, and it is cleaned and maintained as 
described in this guide. 

 

The manufacturer does not take warranty for 
the faults arising from improper use. 

 

Incorrect installation 

 

Connecting to inappropriate electric network 

 

Incorrect maintenance 

 

Not approved modifications, interventions 

 

Using non-original spare components 

 

Do not store and operate the device out of the 
given temperature ranges, it can lead to 
malfunction 

 

Do not try to modify or dismount any part of 
the device 

 

Do not allow the indoor version types of this 
product to come into contact with water or 
other liquids.  

 

Do not store the device close to a heat source 
or direct flame 

 

Use the device only the proper way as 
described in the guide. 

 

Use the equipment only for the purpose it has 
been designed for. 

 

About the security 

Use the power supply provided by manufacturer 
for the device. Use electric power connection as 
specified in this guide. 

To avoid fire and electrical shock 

Be aware that nobody pushes trash, gums and 
other stuffs into the slots of the device.  
Do not install attachments and accessories that 
are not designed for this device. Unplug the 

device in case you do not use it for a very long 
time.

 

Cleaning 

Power down the device before starting the 
cleaning process. Use wet cleaning rag. 

 

General rights and responsibilities 

Procontrol Ltd has the exclusive right for 
producing the device.

 

Procontrol Electronics Ltd. reserves the right to 
modify this documentation and software without 
notice. 

In no event shall Procontrol Ltd. be liable for any 
claim, damages or other liability out of or in 
connection with the usage of the device. 

Warranty period is 2 years.

Summary of Contents for Proxer 7












































Reviews: