procontrol Proxer 7, User Manual

Page: 16 / 43

16. oldal / 44
PROCONTROL ELECTRONICS LTD
www.procontrol.hu
Procontrol Proxer7
ID Sent number of
character [parameter]
Sent number of
bits [parameter]
Sent message via Proxer7
32547698 10 32 0032546798
5 32 32546798
5 16 41842
Additional character
The co-parameter of the sent number of character is the additional character . If the addition
needed to the right number of character, it would be supplemented with the here defined character.
In the following example the „ sent number of character’ s value = 10 .
ID Additional character Sent message via Proxer7
32547698 „0” 0032546798
„P” PP32546798
Message template
The Proxer7 device’s basic function is the reading and sending of the RFID transponder ID. It may
be necessary in established system to use a custom frames attach to the message. The Proxer7 device can
store a 20 character long message, within the place of ID determined, allowing an individual parcel frame,
the opening and closing characters to add to the message. The total length of the message is given here by
the number of frame characters and length of ID, so the 20 character length would be not reduced.
In the following example the sent number of bits = 32 , sent number of character = 10 and
additional character = 0 .
ID Message template Sent message via Proxer7
32547698
ID:[ID place]: Procontrol ID:0032546798: Procontrol
Enter sending
If the ‘ ENTER sending’ parameter can be sent, then fit at the end of the message an ENTER
character