procontrol Proxer 7, User Manual

Page: 20 / 43

20. oldal / 44
PROCONTROL ELECTRONICS LTD
www.procontrol.hu
Procontrol Proxer7
PCS*
ECRRPd[decoded ID on 4 bytes]d[producer code on 1
byte]d[undecoded ID on 8 bytes]d[data speed on 1 byte]d[card type ID
1 byte]d
* The PCS (Procontrol Communication Standard) is the Procontrol Electronics own protocol standard, the
documentation ask at the ordering process.
Baud-rate
In case of Proxer7 with RS232 and RS485 serial port is possibility to the changing of the bit speed
of the communication port. After the change of the parameter need the restart of the device.
The USB peripheral emulation types
The Proxer7 RFID reader can more peripheries emulate with USB port to the PC connected, it
allows wide range of integration. The type of emulation parameters can be adjusted by the user. The
emulated peripheral devices are as follows.
Emulated periphery via USB Short description
Virtual serial port
The PC after the install of the right driver knows the device as a
serial port. Each communication with the device is easily through a
simple terminal program. Parameters of serial communication:
115200kbaud, 8bit, 1 stop bit.
Virtual keyboard * The PC know the device as a keyboard, the data will detect as a
keyboard typed characters.
* In that mode the communication can be only one way, the device can send data to the PC, reverse
communication is not possible. To restore the two ways communication see below the detailed description.
Language of keyboard emulation
The Proxer7 with appropriate settings is suitable for multiple language keyboard emulation. The
different language manifests in the practice of the different button allocation. The button code depends on
the physical location of button. The same location in two different language keyboard results the same code.
The PC’s operating system identifies the correct character depend on the language settings. For example:
the code of „0” character is on the English and Hungarian keyboard: the code of “0” on the English
keyboard is “ö” character code on the Hungarian keyboard. Selecting the appropriate language ensures that
the PC interpret the characters from the Proxer7 device properly.
The select of the keyboard language obviously interpreted only in case of USB keyboard emulation
application. In case of other type is ineffective.