V2.04 Page 6 von 7
Stand: 08.04.2018
Diese Bedienungsanleitung ist Eigentum der Fa. ProChip. Sie wird Kunden und Wiederverkäufern der Fa. ProChip kostenlos
zur Verfügung gestellt. Jede Vervielfältigung oder Modifikation, Weitergabe, Digitalisierung oder Abänderung zur
Eigenverwendung ist ohne schriftliche Erlaubnis der Fa. ProChip verboten.
© 2013 by ProChip
Troubleshooting
Problems setting the "CAN slave mode " :
If you can not enable the CanSlave mode by the G1 Console, press and hold the On / Off
button on the G1 Console from the beginning of the procedure "fixed" during the activation
process.
Error messages:
ErrorNr = 1 / Failed to set the CanSlave mode
ErrorNr = 2 / Failed to read the serial number
ErrorNr = 3 / Failed to write the Vmax value to the Console
ErrorNr = 4 / Failed to write the Vmax value to the Motor
ErrorNr = 5 / Failed to read the Vmax value from the Console
ErrorNr = 6 / Failed to read the Vmax value from the Motor
ErrorNr = 7 / Failed to write the Vmax value to theThrottle
ErrorNr = 8 / Failed to read the Vmax value from the Throttle
ErrorNr = 9 / Failed to read the KM value from the Console
ErrorNr = 10 / letter of the KM article
ErrorNr = 11 / Failed to read the number of ON / OFF cycles
ErrorNr = 12 / Failed to read the number of charge cycles
Limited Error / M-Ped-SE is married with another BionX system as the actual connected
If an error code is displayed, press the ESC or OK button. This will display the main menu.
Press on the OK - button, then repeat the desired process.
