Products:
Proceq Part Numbers:
Manufacturer:
Proceq UT8000
793 10 500
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
Declaration of Conformity
Battery
Model: Battery 18.0 Wh
Battery Directive: 2003/66/EC
Safety Tests: UN38.3
Power Supply (charger)
Safety requirements: EN60950-1
Electromagnetic Compatibility: EN55022-B
The conformity is based on all essential and specific radio test suites for that radio
equipment category identified by the involved Notified Body.
The Wi-Fi module complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Health:
Safety standards:
IP classification:
Battery directive:
Restriction of hazardous
substances (RoHS):
Electromagnetic
Compatibility:
EN 62749:2010
EN 61010-1:2010
IP 67
2006/66/EC
2011/65/EC
RED 2014/53/EU/
EN ETSI 300 328:2015/( V2.1.1)
EN ETSI 301 489-1:2011/(V2.1.1)
EN ETSI 301 489-17:2009/ (V3..1.1)
IEC 62479:2010/EN 62479:2011
Patrick Waller
Chief Operating Officer
Schwerzenbach, 20.05.2019
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral part
of Proceq’s General Terms and Conditions of Sale and General Terms and Conditions of
Rental, together with any other guideline, precautions, policies and conditions which Proceq
has made and may make available to you at www.proceq.com/downloads, as amended
from time to time (the Documents). Proceq reserves the right to change without notice any
information, specifications and recommendations contained in this document and in any of
the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of and your own
conduct while using this product, and any consequences thereof. The use and operation of
this product is at your own discretion and risk. Proceq hereby disclaims any and all loss,
liability or damages resulting from or out of your use of the product. Please ensure you
operate and use this product only for purposes that are proper and in accordance with the
instructions given herein together with all safety and health precautions, applicable laws,
rules, regulations, and as provided for in any of the Documents.
Notice
Swiss Made Declaration
We confirm that the products named above were developed and manufactured in
Switzerland and fulfill the requirements needed for the declaration “Made in
Switzerland” or “Swiss Made”.
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-50, MSchG) covering goods and services.
Products:
Proceq Part Number:
Manufacturer:
Proceq UT8000
793 10 500
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
Patrick Waller
Chief Operating Officer
Schwerzenbach, 20.05.2019
EN
