Operating instructions NJ1 & FREAK Compact bike
31
In addition to these maintenance tasks /
checks by the user, PRO ACTIV has
prescribed
maintenance tasks to be carried
out by the dealer or PRO ACTIV
for safe
operation of the product and to minimise the
risk to the user or third-parties.
The initial inspection is performed after running
200 kilometres or 5 months after delivery
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 36.
Subsequent inspections are then always
performed after 1,000 kilometres running or
after a period of 1 year (whichever comes first).
The maintenance schedule can be found in the
inspection lists in chapter 36.
After extreme loads, e.g. during holidays where
the product was used on sand, near sea water
or in snow, it is recommended that an
additional deep clean and inspection is
performed by your dealer or PRO ACTIV.
To maintain the operating licence and the
warranty validity, the performance of the
maintenance tasks must be documented. Any
faults identified during maintenance work must
be rectified and documented as such before
further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
27.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 36. The
inspection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
under the link
"more documents >>". In any event, keep all
documents / service reports as a means of
proof, and get any service work which was not
carried out by PRO ACTIV documented.
Please bring these operating instructions /
service booklet to every service.
28 Disposal & Recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your dealer
in a proper, environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
In the following section, you will find a
description of the materials for the disposal
and recycling of the product and its packaging:
Aluminium:
frame, rims, leg rest, tube plugs
Steel:
fixing points, quick-release / screwed
axle, screws, nuts
Plastic:
handles, quick release lever, tube
plugs, tyres, bags for packing
Synthetic fibres and foam:
padding, covers
Cardboard / paper:
packaging
29 Re-use
If your product has been provided to you by
your funding provider and you no longer
require it, you should report this fact to your
health insurance company or your dealer and
follow the instructions provided by them. Your
product can then be simply and economically
re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV.
In addition to the instructions contained in
chapter 26 (Cleaning and care), a thorough
cleaning of the grips and all controls must be
carried out.
Before the product can be reused, it must be
prepared with care. A disinfection agent must
be sprayed onto all surfaces that the user may
make contact with. For this purpose, a liquid
disinfection agent based on alcohol must be
used for the quick residue-free disinfection
