Operating instructions NJ1 & FREAK Compact bike
28
Figure 60: Eccentric pin inserted
Figure 61: Drive unit adapted completely
22.4 Decoupling the drive unit
For decoupling the drive unit from the chassis,
first operate the parking brake. Then remove
the securing cord from the lever of the
eccentric pin and turn the lever of the eccentric
pin clockwise by approx. 90°.
Figure 62: Lever of the eccentric pin opened and
securing cord removed
Now the eccentric pin is removed from the
adapter plates. For easier handling, raise the
drive unit on the pedal bearing housing slightly
in the process. After removing the eccentric
pin, the chassis is lowered to the ground
automatically.
Figure 63: Eccentric pin removed from the adapter
plate, chassis lowered to the ground
Now lift the drive wheel a little and hang the
insertion maul of the drive unit adapter plate
out of the chassis.
Securing cord
hung on
Lever of the eccentric
pin closed (turned
upwards)
Eccentric pin
inserted in the
adapter plate
Lever of the eccentric
pin opened
(turned downwards)
Securing cord
removed
Eccentric pin
removed
