Operating instructions NJ1 & FREAK Compact bike
22
The
open belt system
can be subsequently
adjusted. The slack of the seating surface can
be changed using Velcro straps.
Figure 37: Open belt system with Velcro straps for
adjusting the slack
With "Open belt system" seating system:
when adjusting the slack of the belt system,
take care that the slack does not protrude
beyond the lower edge of the frame. Otherwise
when overcoming obstacles, you may get
caught the belt system and your bottom that
may result in injury and damage to the belt
system. The product may not be operated with
damaged seating system.
It is mandatory to use a seat cushion on
the seating system. At cold temperatures, the
seat cushion prevents the lower abdomen from
under-cooling and protects against dirt and
wetness. Moreover, the seat cushion also
ensures for equal pressure distribution.
19 Neck rest
19.1 Neck rest height adjustment
To adjust the height of the neck rest, two M6
fixing screws (AF 5 mm) have be loosened on
the neck rest holding tube. Then the height of
the neck rest holding tube can be adjusted.
Once the desired height has been found, the
two M6 fixing screws (AF 5 mm) are tightened
to 7 Nm again and secured using screw
locking fluid.
Figure 38: Height adjustment of the neck rest via
two M6 fixing screws on the neck rest holding tube
19.2 Neck rest angle adjustment
The angle adjustment of the neck rest is
carried out via the clamp lever on the neck rest
holding tube. Open the quick release lever and
set the neck rest padding to the desired angle.
Then close the quick release lever again.
Figure 39: Quick release lever closed
Figure 40: Quick release lever opened for adjusting
the neck rest angle
M6 clamp screw for
height adjustment
Quick release
lever closed
Quick release
lever open
