6
Installation
259
under 4-R2
201
1.6mm to 10mm
Panel thickness
Unit: mm
Cut a hole, and mount the GP to the panel from the front.
Attach the Installation Fasteners from behind.
Fasten the screw of the installation fasteners with a screwdriver.
The fastening torque necessary for waterproofing is 0.5-0.6N•m.
•
Tightening the screws with too much force can cause a damage.
Panel
GP unit
+1
0
+1
0
•
Before installing the GP into a cabinet or panel, check that the Installa-
tion gasket is securely attached to the unit.
Confirm the Installation Gasket’s Seating
It is strongly recommended that you use the gasket.
Place the GP on a level surface with the display panel facing downward. Check
that the GP’s installation gasket is seated securely into the gasket’s groove, which
runs around the perimeter of the panel’s frame.
Installation Gasket
Rear face
