7-1/4 in. Metal Cutting Circular Saw
19
Visit www.princessauto.com for more information
8439630
V 2.7
LUBRICATION
Only use the lubricants supplied with the tool or specified by the
manufacturer. Other lubricants may not be suitable and may damage the
tool or cause a malfunction during use.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant
to the steel parts to avoid rust. Remove the lubricant before using the
tool again.
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring
it to the appropriate recycling facility.
TROUBLE SHOOTING
Problem(s)
Possible Cause(s)
Suggested Solution(s)
Metal cutting saw
will not start.
No supply of power.
Check that the power cable is
properly connected and that
there is power at the outlet.
Brushes have worn or
are sticking.
Disconnect the power, remove
the brush caps and ensure that
the brushes move freely in the
holders. Check whether the
brushes require replacing.
The trigger switch
is faulty.
Replace the trigger switch.
Motor components are
worn or short-circuited.
Replace defective components.
The cord is damaged.
Replace the power cord.
