7-1/4 in. Metal Cutting Circular Saw
13
Visit www.princessauto.com for more information
8439630
V 2.7
determined by the angle plate's
position. If the angle plate is at
0°, the laser will be at 0° (B).
If the angle plate is at 45° (C),
the laser will be at 45° (D). See
Figure 8.
ALIGNING THE LASER
GUIDELINE
DANGER: Laser radiation. Avoid
direct eye contact with light source.
WARNING: Use of controls,
adjustments or performance of
procedures other than those
specified within this manual may
result in hazardous radiation
exposures. When you adjust the laser
DO NOT squeeze the trigger (Fig.9).
Starting the blade unexpectedly can
be dangerous.
1. To adjust the laser, use the M2
hex wrench to tighten or loosen
the hex screw (A) in order to
adjust the laser direction (B).
See Figure 10.
2. To align the laser with the
cutting line direction use the
flat head screwdriver (A). See
Figure 11.
3. To return the laser to zero, move
Fig.8
Fig.9
Fig.10
Fig.11
