51
AP Router is powered on.
Connect on Demand
connection type means to setup
the connection through USB3G protocol whenever you
send the data packets out through the WAN interface;
there are a watchdog implemented to close the USB3G
connection while there are no data sent out longer than
the idle time set.
Manual
connection type means to setup the connection
through the USB3G protocol by clicking the Connect
button manually, and clicking the Disconnect button
manually.
Idle Time: If you select the USB3G and Connect on Demand connection type,
fill in the idle time for auto-disconnect function. Value can be between 1 and
1000 minutes.
MTU Size: Fill in the MTU size of MTU Size. The default value is 1490.
Attain DNS Automatically: Click to select getting DNS address for DHCP support.
Please select Set DNS Manually if the DHCP support is selected.
Set DNS Manually: Click to select getting DNS address for DHCP support.
DNS 1: Fill in the IP address of Domain Name Server 1.
DNS 2: Fill in the IP address of Domain Name Server 2.
DNS 3: Fill in the IP address of Domain Name Server 3.
Clone MAC Address: Fill in the MAC address that is the MAC address to be
cloned.
Enable uPNP: Click the checkbox to enable uPNP function.
Enable IGMP Proxy: Click the checkbox to enable IGMP Proxy.
Enable Ping Access on WAN: Click the checkbox to enable WAN ICMP
response.
Enable Web Server Access on WAN: Click the checkbox to enable web
configuration from WAN side.
Enable IPsec pass through on VPN connection: Click the checkbox to enable
IPSec packet pass through.
Enable PPTP pass through on VPN connection: Click the checkbox to enable
PPTP packet pass through.
Enable L2TP pass through on VPN connection: Click the checkbox to enable
L2TP packet pass through.
Apply Changes: Click the Apply Changes button to complete the new
configuration setting.
Reset: Click the Reset button to abort change and recover the previous
