32
IAPP: Click to enable or disable the IAPP function.
Protection: Protect 802.11n user priority.
Aggregation: Click to enable or disable the Aggregation function.
Short GI: Using a short (400ns) guard interval can increase throughput.
However, it can also increase error rate in some installations, due to increased
sensitivity to radio-frequency reflections
WLAN Partition: Click to enable or disable the WLAN Partition function.
STBC: Click to enable or disable the STBC function.
20/40MHz Coexist: Click to enable or disable the Coexist function.
RF Output Power: To adjust transmission power level.
3.4.3
Security
This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by
using encryption keys could prevent any unauthorized access to your wireless
network.
Select SSID: Select the SSID from multiple APs.
Encryption: Select the encryption supported over wireless access. The
encryption method can be None, WEP, WPA, WPA2 or WPA-Mixed.
Use 802.1x Authentication: While Encryption is selected to be WEP. Click the
check box to enable IEEE 802.1x authentication function.
Authentication Type: Click to select the authentication type in Open System,