10
MODE Selection Button
The Mode selection button changes the mode
of operation of the charger between AUTO
CHARGE mode, ENGINE START mode, and
STABLE POWER mode. In Auto Charge mode,
once the charging parameters have been set
and the START button has been pressed, the
charger will commence a proprietary, advanced
multi-phase charging sequence designed to
provide an optimal charge. STABLE POWER
mode provides steady, stable power to
maintain system voltage during on-vehicle
repairs and other applications where it is
detrimental for system voltage to drop below
a specific threshold. ENGINE START mode provides engine starting assistance to jump start vehicles with
depleted batteries.
SUPPLY (Stable Power) Control Buttons
Once an operator chooses SUPPLY Mode, they are able to select the desired system voltage to be maintained.
Desired voltage can be increased or decreased in 0.1V increments
CHARGE Control Buttons
Once an operator chooses CHARGE Mode, there are additional settings that must be chosen prior to
commencing the charging sequence.
The Type button allows an operator to choose the specific battery type to be charged, enabling the charger
to provide the exact power profile for that battery type. Selectable battery types include traditional flooded
batteries and AGM batteries (including Spiral Wound batteries).
The Volt button allows the operator to choose the desired voltage for the specific application. Selectable
voltages include 12V and 24V.
The Rate button allows an operator to choose the desired charge rate for each specific application. Selectable
charge rates include 60A, 40A or 10A charge rates (12V mode), 20A and 10A charge rates (24V mode)..
START Button
The START button is used to commence each function once all of the functional parameters have been set to
the desired values. The START button can also be used to discontinue any function once it has commenced.
LED Status Lights
LED lights in the control panel indicate which functional mode the charger is currently set to, as well as current
status of the chosen function once the function has commenced. In addition, each function mode features
error LEDs to alert the operator to unsafe operating conditions, including battery faults and reverse polarity
connections.
CONTROLS AND INDICATORS
