SETTINGS
RESERVATION, SOUND, DIRECTION, PASSWORD ENABLE/DISABLE, BRIGHTNESS
Setting Up
1)
Press the [MENU] button.
2)
Press the arrow button until the Setting Up option appears.
3)
Press [OK]. The Reservation setting appears
(enables/disables the Timer).
NOTE
:
Press [OK] to enable/disable a setting. Selecting “X” will disable the
setting while “O” will enable the setting.
4)
Set accordingly and press the arrow button to go to the next setting.
5)
The Sound setting appears
(enables/disables sound)
.
6)
Set accordingly and press the arrow button to go to the next setting.
7)
The Direction setting appears
(displays vertical or horizontal viewing)
.
8)
Set accordingly and press the arrow button to go to the next setting.
9)
The Password setting appears
(enables/disables password)
.
10)
Set accordingly and press the arrow button to go to the next setting.
11)
The Brightness setting appears
(set the brightness level).
12)
Press [OK] to enter the additional setting available for brightness.
13)
Use the and arrow buttons to select a Daytime brightness.
14)
Press [OK].
15)
Use the and arrow buttons to select a Nighttime brightness.
16)
Press[OK].
17)
Set the time when nighttime begins.
18)
Press[OK].
19)
Set the time when nighttime ends.
20)
Press[OK].
21)
Press [ESC].
22)
Press [ESC] again to exit the Setting Up option.
WARNING!
Do not cut power to the sign every night as this will reduce the memory battery life
significantly, causing the sign to eventually lose all stored messages. The proper procedure
is to use the reservation feature to turn off the display at a specified time. The battery
backup is there to allow servicing or power outage emergencies.
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Page 18
Summary of Contents for Marquee-Lite Plus
Page 1: ...Remote Keyboard USER GUIDE...
