PRO Light V200LED, User Manual

Page: 26 / 44

V200LED
4
1. LED DISPLAY;
2. MENU button to call the adjusting menu and to
select the menu items;
3. UP and DOWN buttons to change an adjustment
in the menu;
4. ENTER button to activate a menu item and to
memorize an adjustment;
5. Indicating LEDs for the operating mode:
DMX = lights up when DMX control signals are
resent at the DMX INPUT;
MASTER = operation without DMX control unit or
with the remote control EC800;
SLAVE = control via another V200LED;
SOUND = shortly lights up when the unit changes
the color, the light pattern, or the movement by
the sound picked up by the internal microphone;
6. ROTARY ARM;
7. TESTA ORIENTABILE;
8. PLUG for connection to a socket (230 V~/50
Hz) via the supplied main cable. Only replace a
blown fuse by one of the same type;
9. Connection for the remote control EC800 (pic. 2);
10. DMX IN (3-pole XLR); 1=ground, 2=DMX-, 3=DMX+;
11. DMX OUT(3-pole XLR); 1=ground, 2=DMX-, 3=DMX+;
12. Control SENSITIVITY for the sensitivity of re-
sponse in case of music control via the internal
microphone;
13. Remote control EC800 (the remote control is
available as an accessory and is not supplied with
the V200LED).
14. STAND BY button for the sleep mode: The pan
head goes to the starting position and the light
beam is extinguished. The LED next to the but-
ton lights up as a a check.
15. FUNCTION button for various functions depend-
ing on the operating mode selected with the
MODE button.
16. MODE button for switching between:
- Stroboscope mode; LED next to the MODE but-
ton does not light up;
- Show mode: LED flashes slowly;
- Manual selection of color: LED lights up con-
tinuously;
- Manual positioning of the light beam: LED
flashes rapidly.
Note: For control via the remote control no DMX sig-
nal must be present at the DMX INPUT (10).