PRO Light V200LED, User Manual

Page: 37 / 44

15
V200LED
6. Activate the function with the button ENTER.
7. Make the readjustment with the button DOWN or UP.
8. To store, press the ENTER key. With the UP or DOWN button you can switch to another corrective function.
9. Approx. 8 second after pressing the last button the adjusting menu is automatically exited.
3.14 AUTOTEST
Three programs are available for the self-test of the unit. Press the button MENU so many times until the
desired test program is shown in the display:
AtS0
Short test: to start press the button ENTER. During the test run,
tE50
flashes in the display. At the end of the
test
F ln5
(finish) is shortly indicated, then the unit switches back to the previous operating mode.
AtS1
o
AtS2
Continuous test: for both test programs 12 different motion sequences and different light beam colors can
be selected. In addition, the motion speed can be changed.
1. To start press the ENTER button. During the test run
tE51
or
tE52
flashes in the display.
2. To change the course or speed of movement, press the ENTER button. The display shows
NovE
(Move).
3. Select the function to be changed with the button DOWN or UP:
4. To activate the function, press the button ENTER. The display shows the present adjustment: for the function
sequence of motion, the program number
Pr1 ... Pr12
, for the function speed a value between “0” and “255”.
5. Change the adjustment with the button DOWN or UP and activate the adjustment with the button ENTER.
NouE
Sequence of motion
NoSP
Speed of motion
CoLo
Color