PRO Light V200LED, User Manual

Page: 29 / 44

7
V200LED
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to the main jack (8) first and then to a socket (230 V~/50 Hz). The pan head
and all control motors go to a defined starting position. Then the unit is ready for operation and can be oper-
ated via a DMX controller or independently displays its Show program in succession. To switch off, disconnect
the main plug from the socket. For a more convenient operation it is recommended to connect the unit to a
socket which can be switched on and off via a light switch.
3.2 BASIC ADJUSTMENTS
Via the menu the following basic adjustments can be made. Press the MENU button (2) so many times until
the desired function is shown on the display (1). Then press the ENTER button (4). Never wait for more than
8 seconds to press the next button, otherwise the adjusting procedure will be stopped.
MASTER DMX SLAVE SOUND
ENTER UP DOWN MENU
[MENU]
[ENTER]
[UP/DOWN]
Used to access the menu or to return to a previous menu option.
Used to select and store the current menu or confirm the current function value or option
within a menu.
To choose a menu item and set a function.
Every time you turn on the unit, it will run built-in program to reset all motors to their home position.