8
5. The Console (16) requires four AA batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents.
Remove the screw remove the battery
cover, and insert the batteries into the battery
compartment.
Make sure to orient the batter-
ies as shown by the diagram inside the
battery compartment.
Then, reattach the
battery cover.
5
Batteries
Screw
Battery
Cover
16
6
6. While another person holds the Console (16)
near the Upright (13), connect the wires on the
Console to the Upper Wire Harness (23) and to
the Pulse Wires (59).
Insert the excess wire into the Upright (13) or
into the Console (16).
Tip: Avoid pinching the wires.
Attach the
Console (16) to the Upright (13) with four M4 x
15mm Screws (48).
48
Console
Wire
16
Pulse
Wires
59
13
23
All manuals and user guides at all-guides.com
