5
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
and an
adjustable wrench
.
Note: If a part is not in the hardware kit, check to see if it has been preattached.
1. Attach the Front Stabilizer (A) to the Frame (B)
with two Long Bolts (C), two Curved Washers
(D), two Flat Washers (E), and two Acorn Nuts
(F).
2. Attach the Rear Stabilizer (G) to the Frame (B)
with two Long Bolts (C), two Curved Washers
(D), two Flat Washers (E), and two Acorn Nuts
(F).
C
A
B
1
E
D
C
B
F
2
E
E
D
D
G
F
All manuals and user guides at all-guides.com