2-14
PS-400G Series User Manual
3.6 Sound Output
Either line output or speaker lines can be attached to this connector.
Pin-Jack Cable Pin Assignments
Sound Output Cable
The following example connects a speaker to the PS-G unit using a Digital Electronics
Corporation pin-jack cable (GP077-SDAD10). The procedure for connecting a Line Output cable
is the same, however a separate amplifier will be required.
Connection Procedure
1)
Check that the PS-G power cord is disconnected.
2)
Loosen the terminal block attachment screws and remove the terminal block.
SP-OUT
GND
LINE-OUT
Signal Name
Description
Direction
SP-OUT
Speaker Output
Output
GND
Ground
-
LINE-OUT
Line Output
Output
Attachment
Screws
