Chapter 5 - System Setup
5-19
PL-5900 Series User Manual
IRQ-3 assigned to
Legacy ISA
IRQ-4 assigned to
Legacy ISA
IRQ-5 assigned to
PCI/ISA PnP
IRQ-7 assigned to
PCI/ISA PnP
IRQ-9 assigned to
PCI/ISA PnP
IRQ-10 assigned to
Legacy ISA
IRQ-11 assigned to
Legacy ISA
IRQ-12 assigned to
PCI/ISA PnP
IRQ-14 assigned to
PCI/ISA PnP
IRQ-15 assigned to
Legacy ISA
↑↓→←
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
IRQ Resources
Item Help
Menu Level
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/ISA
PnP for devices
compliant with the
Plug and Play standard
whether designed for
PCI or ISA bus
architecture
Select IRQ Resources from the PnP/ PCI Configurations menu and the following
screen will appear.
5.2.10 IRQ Resources
IRQ-3 assigned to ~ IRQ-15 assigned to
This setting determines the type of device assigned to the IRQ. This function is
available when the [Resource Control By] option under the [PnP/ PCI Configura-
tions] menu is set to [Manual].
[PCI/ISA PnP] .. Select to use a PnP-ready PCI or ISA card.
[Legacy ISA] .... Select to use a non-PnP ISA card.
The initial settings are as shown below.
Initial Value
Initial Value
IRQ-3 assigned to
Legacy ISA
IRQ-10 assigned to
Legacy ISA
IRQ-4 assigned to
Legacy ISA
IRQ-11 assigned to
Legacy ISA
IRQ-5 assigned to
PCI/ISA PnP
IRQ-12 assigned to
PCI/ISA PnP
IRQ-7 assigned to
PCI/ISA PnP
IRQ-14 assigned to
PCI/ISA PnP
IRQ-9 assigned to
PCI/ISA PnP
IRQ-15 assigned to
Legacy ISA
