Pro-face PL-5900 Series, User Manual

Page: 59 / 145

Chapter 5 - System Setup
5-2
PL-5900 Series User Manual
Select Standard CMOS Features and the following screen will appear.
5.2 System Parameters
„ „
„ „ „
Date/Time
This data sets the PL's internal time and date.
Hours :00 - 23
Minutes :00 - 59
Seconds :00 - 59
„ „
„ „
„
IDE Primary Master/ IDE Primary Slave
This display shows the capacity of the PL's IDE hard disk drive. Press [Enter] to
display the parameter setting menu.
"5.2.2 IDE Primary Master/IDE Primary Slave"
„ „ „ „ „
Drive A/Drive B
This setting determines the format used by the PL's internal floppy disk drive.
The available settings are [360K - 5.25in], [1.2M - 5.25in], [720K - 3.5in], [1.44M
- 3.5in.], [2.88M - 3.5in.] and [None].
The A: drive's [1.44M - 3.5in] and the B: drive is [None]. These selections are
factory set and recommended for most users.
„ „
„ „
„
Video
The selections for the screen (video) mode. The [EGA/VGA] and is recommended
for most users. The other available settings are [CGA40], [CGA80] and [Mono].
Use the menu screen to select a System Item, and then enter the desired system
information. Each item's detailed settings are shown here.
Date (mm:dd:yy): Thu, Aug 24 2000
Time (hh:mm:ss): 11 : 15 : 14
IDE Primary Master Press Enter10056 MB
IDE Primary Slave Press Enter None
Drive A 1.44M, 3.5 in.
Drive B None
Video EGA/VGA
Halt On All, But Disk/Key
Base Memory 640K
Extended Memory 56320K
Total Memory 57344K
↑↓→← :
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Standard CMOS Features
Item Help
Menu Level
Change the day, month,
year and century
Normmally, use only the factory (default) settings.
5.2.1 Standard CMOS Features