Chapter 1 - PL Basics
1-4
PL-5900 Series User Manual
Maintenance Options
Name
Model
number
Description
Installation
Fasteners
GP070-AT 01
Used to install the PL into a panel or cabinet. Same as original
equipment brackets. (4 brackets/set)
Installation
Gasket
PL-WS500
Used to prevent moisture from entering into the PL’s case from
the front face. Same as original equipment gasket.
Backlight
GP577T -
BL00-MS
Spare Backlight for maintenance. (2 bulbs/set)
MS: Combination of 2 units - Master or Slave, is possible.
M: Used only for Master.
S: Used only for Slave.
•
The PL is equipped with three IDE interfaces, two of which can be used by the
HDD or CF Card units (PL-5901T can use only one), and one for the CD-ROM
drive. Physically, even though up to three IDE drive units can be connected at the
same time, IDE interface specifications require that a controller's simultaneous
operation be limited to a single master and slave unit, for a total of two devices.
The following chart shows the combinations available when using two IDE units
(PL-5901T can use only one).
HDD Unit
MS M
M
S
CD-ROM Drive Unit
S
S
CF Card Unit
S
M
M MS
