Chapter 5 - System Setup
5-9
PL-5900 Series User Manual
Select Integrated Peripherals from the Main Menu and the following screen will
appear.
5.2.5 Integrated Peripherals
SIS 540 Onchip PCI Device
This setting enables the onboard Ethernet interface. Press [Enter] to display the
menu items for this setting. The available settings are [Enabled] and [Disabled].
The factory default setting is [Enabled] and is recommended for most users.
Super 10 Device
This setting configures the various onboard interfaces. Press [Enter] to display the
menu items for the setting.
"5.2.6 Super 10 Device"
USB Controller
This setting determines whether to use the USB controller. The available settings
are [Disabled] and [Enabled]. The factory default setting is [Enabled] and is
recommended for most users.
This feature cannot be used with MS-DOS operating systems. Be sure to change this
setting to [Disable].
USB Keyboard Support
This setting determines whether to use the USB interface keyboard. The available
settings are [Disabled] and [Enabled]. The factory default setting is [Enabled] and
is recommended for most users.
This feature cannot be used with MS-DOS operating systems. Be sure to change this
setting to [Disable].
Expantion mode Support
This setting determines if the VGA Expansion Mode is supported or not. Settings
available are [Disabled] and [Enabled]. The factory setting is [Disabled].
SIS 540 OnChip PCI Device
Press Enter
SuperIO Device
Press Enter
USB Controller
Enabled
USB Keyboard Support
Enabled
Expansion mode Support
Disabled
IDE HDD Block Mode
Enabled
Init Display First
PCI Slot
System Share Memory Size
8 MB
↑↓→←
:
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Integrated Peripherals
Item Help
Menu Level
