5-1
PL-5900 Series User Manual
1) Connect a PS/2 keyboard to the PL.
2) Turn the PL unit's power ON.
3) After the message "Press <DEL> to Enter SETUP" appears, press the [DEL]
key until the following screen is displayed.
The following settings are those pre-set at the factory.
5-1 Setup Procedures
5-2 System Parameters
This chapter explains how to enter a PL unit's system settings, as well as the
cautions required both before and during set up.
5.1
Setup Procedures
Chapter
5
System Setup
KEYBOARD ACTION KEYS
A summary of the keyboard keys used to move through screens and make selections.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed refers to a system setting area.
4) Use the arrow keys to move the cursor to the desired selection and use the
[Enter] key to select an item.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
ESC: Quit
↑↓→←
: Select Item
F10
: Save & Exit Setup
Time,Date,Hard Disk Type...
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Password
Save & Exit Setup
Exit Without Saving
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Normally, use only the factory (default) settings.
