E1
GP2000 Series VM Unit User Manual
Thank you for purchasing the Pro-face GP2000 VM Unit (GP2000-VM41). The VM
Unit is installed in the rear of the Pro-face GP2000 Series Operator Interface (hereaf-
ter referred to as the "GP") and allows the GP to display images taken with a video
camera or sent from a PC.
Please note that you will need GP-PRO/PB III for Windows Ver. 5.05 or higher to
use the entire range of VM Unit features.
This manual provides important information for using the VM Unit with the GP. Be
sure to read the relevant sections prior to using this unit, and store it in an easy-to-
find, safe place.
© 2001, Digital Electronics Corporation.
The company names and product names in this manual are the registered trademarks
of their respective companies.
PREFACE
1)
It is forbidden to copy the contents of this manual, in whole or in part, without
the express permission of Digital Electronics Corporation of Japan.
2)
The information provided in this manual is subject to change without notice.
3)
This manual has been written with care and attention to detail; however,
should you find any errors or omissions, please contact Digital Electronics
Corporation and inform them of your findings.
4)
Please be aware that Digital Electronics Corporation shall not be held liable by
the user for any damages, losses or third party claims arising from any uses of
this product.
5)
This unit is UL/c-UL (CSA) approved and CE marked. However, when this
unit is installed in a GP2000 series unit that does not comply with UL/c-UL
(CSA) and CE standards, the combination will cause the VM Unit to fail to
comply with CE and UL/c-UL (CSA) standards.
NOTE:
